Renault Kangoo Quiz
Renault Kangoo Driver's Manual

Tool kit

In this manual: Renault Kangoo Driver's Manual
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

Bloc outils
Tool kit

To remove tool kit 1 from the boot Depending on the vehicle, it may be hidden by a cover; open it. Unscrew wing nut 2, then pull the tool kit towards you.

To reposition the tool kit Position peg 4 of the tool kit in housing 3. Make sure the kit is correctly positioned so that wing nut 2 can be screwed in.

Bloc outils

The tools supplied in the tool holder depend on the vehicle.

Retaining strap (depending on vehicle) After use, reposition the strap, making sure it holds all the tool kit components.

Wheel brace 5

To unscrew the wheel bolts and the nut of the spare wheel cradle.

Bolt guide 6 (depending on vehicle)

Used to finish unscrewing or to start screwing in the wheel bolts.

Hub cap tool 9

To remove the wheel trims.

Jack 7

Refer to the paragraph "Wheel change" in chapter 5.

Towing eye 8

Refer to the paragraph “Towing: breakdown assistance” in chapter 5.

! Never leave tools loose in the vehicle: risk of projectiles during braking. After use, make sure to clip the tools into the tool kit, then position it correctly in its housing: risk of injury. When wheel bolts are supplied in the tool kit, use these bolts exclusively for the spare wheel: refer to the label on the spare wheel. The jack is intended for wheel changing only. Under no circumstances must it be used to carry out a repair or to access underneath the vehicle.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.