Headlamps: replacing bulbs
Dipped/main beam headlamps
Dipped/main beam headlamps
Turn cover 1 a quarter turn to unlock it.
Disconnect the wiring.
Remove the rubber boot 2.
Unclip spring clip 3 to remove the bulb.
! Deactivate the Stop and Start function before any work in the engine compartment.
Bulb type: H4
Be sure to use 55W anti-UV bulbs to avoid degrading the plastic lens of the headlamps.
! When working near the engine, it may be hot. In addition, the cooling fan may start at any time. Risk of injury.
Do not touch the glass of the bulb.
Hold it by its base.
To refit, follow the procedure in reverse.
Make sure the rubber boot 2 is correctly repositioned so that all three lamellae are clearly visible.
! Bulbs are pressurised and may burst during replacement. Risk of injury.Front position light
Front position lamp
Open access panel A under the wheel arch. To make access to the panel easier, turn the wheel towards the inside of the vehicle.
Turn bulb holder 4 to unlock it, and remove it from its location, without disconnecting the wiring.
Replace the bulb.
Bulb type: P21/5W
To refit, follow the procedure in reverse.
Turn indicator light
Turn indicator light
Open access panel A in the wheel arch. To make access to the panel easier, turn the wheel towards the inside of the vehicle.
Turn bulb holder 5 to unlock it, and remove it from its location, without disconnecting the wiring.
Replace the bulb.
Bulb type: PY21W
To refit, follow the procedure in reverse.
When refitting, make sure the panel is securely held in place.
Depending on local legislation, or as a precaution, obtain from an authorised dealer an emergency kit containing a set of bulbs and a set of fuses.
! Deactivate the Stop & Start function before any work in the engine compartment. ! Bulbs are pressurised and may burst during replacement. Risk of injury.Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.