Renault Kangoo Quiz
Renault Kangoo Driver's Manual

Wheel trims / Wheels

In this manual: Renault Kangoo Driver's Manual
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

Wheel trim 1

Enjoliveur 1
Wheel trim 1

Wheel trim 1 (wheel bolts concealed)

Remove it using hub cap tool 2 (located under the tool kit), inserting the hook far enough into the hole near the valve (to reach the metal retaining wire at the back of the wheel trim).

To refit it, orient it relative to the valve. Push in the retaining clips starting on the valve side A, then B and C, and finish with the side opposite the valve D.

Wheel trim 3

Enjoliveur 3
Wheel trim 3

Wheel trim 3 (wheel bolts visible)

To remove it without removing the wheel, squeeze it at the points indicated by the arrows.

Turn it so that the mounting tabs behind the wheel bolts are released.

To refit it, carry out the procedure in reverse.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.