Ambient Temperature Sensor Repair Procedures

Inspection

1. Check the resistance of the ambient temperature sensor between terminals 1 and 2. Check that it changes when the ambient temperature changes.

   

   1. Ambient Temperature Sensor (+)

   2. Sensor Ground

   
   Specification

   Ambient Temperature [°C (°F)]	Resistance between Terminals 1 and 2 (kΩ)
   -40 (-40)	881.03
   -30 (-22)	480,41
   -20 (-4)	271,21
   -10 (14)	158,18
   0 (32)	95.096
   10 (50)	58.799
   20 (68)	37.315
   30 (86)	24.260
   40 (104)	16.130
   50 (122)	10.950
   60 (140)	7,579
   70 (158)	5.341
   80 (176)	3.828

Diagnosis Using GDS

1. 1
   The heating, ventilation and air conditioning system can quickly diagnose faulty components using the Generic Diagnostic System (GDS). The diagnostic system (GDS) provides the following information: (1) Self-diagnosis: Diagnostic Trouble Code (DTC) check and display. (2) Current data: Checking the input/output status of the system. (3) Actuation test: Checking the operating status of the system. (4) Additional functions: Other controls such as system option and zero point adjustment.
2. 2
   Select "Vehicle Model" and the system to be checked to inspect the vehicle with the tester.
3. 3
   Select the Current Data menu to check the current status of the input/output data. The input/output data for the sensors related to the ambient temperature sensor can be checked.

   

Replacement

1. 1
   Disconnect the negative (-) battery terminal.
2. 2
   Remove the front bumper. (Refer to Body - "Front Bumper Cover")
3. 3
   Disconnect the connector (A) and remove the ambient temperature sensor (B).

   

4. 4
   Install in the reverse order of removal.