ABS Control System Malfunction (43)
This DTC is output when the VSC system detects a malfunction in the ABS.
DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
43 |
A malfunction in the anti-lock brake system. |
Anti-lock brake system |
NOTICE:
When replacing the master cylinder solenoid, perform calibration (See page .gif)
).
PROCEDURE
CHECK ANTI-LOCK BRAKE SYSTEM
(a) Clear the DTCs (See page ).
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON.
(d) Check if an ABS DTC is output (See page
).
Result | Proceed to |
|---|---|
DTC (ABS DTC) is not output |
A |
DTC (ABS DTC) is output |
B |
| B | .gif) | REPAIR CIRCUITS INDICATED BY OUTPUT DTCS |
|
.gif)
CONFIRM DTC
(a) Clear the DTCs (See page ).
(b) Turn the ignition switch off.
(c) Turn the ignition switch to ON.
(d) Check if the same DTC is output (See page
).
Result | Proceed to |
|---|---|
DTC is not output |
A |
DTC is output |
B |
| A | | USE SIMULATION METHOD TO CHECK |
| B | | REPLACE MASTER CYLINDER SOLENOID |
Test yourself
A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.