Brake Warning Light does not Come ON

Refer to Brake Warning Light Remains ON (See page ).

Refer to Brake Warning Light Remains ON (See page ).

NOTICE:

When replacing the master cylinder solenoid, perform calibration (See page ).

1. CHECK CAN COMMUNICATION LINE

(a) Turn the ignition switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the ignition switch to ON.

(d) Turn the Techstream on.

(e) Select CAN Bus Check from the System Selection Menu screen and follow the prompts on the screen to inspect the CAN bus (See page ).

OK:

CAN Bus Check indicates no malfunctions in CAN communication.

NG

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)

OK

1. READ VALUE USING TECHSTREAM (BRAKE WARNING LIGHT)

A

REPLACE MASTER CYLINDER SOLENOID

B

GO TO METER / GAUGE SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING)