Side Turn Signal Light Bulb
Components
COMPONENTS
ILLUSTRATION
*1 |
OUTER MIRROR COVER |
*2 |
SIDE TURN SIGNAL LIGHT BULB |
*3 |
SIDE TURN SIGNAL LIGHT SOCKET |
*4 |
SIDE TURN SIGNAL LIGHT ASSEMBLY |
Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. REMOVE OUTER MIRROR COVER
Click here![]()
2. REMOVE SIDE TURN SIGNAL LIGHT BULB
(a) Release the clips to detach the side turn signal light assembly as shown in the illustration.
![]() |
Remove in this direction |
(b) Turn the side turn signal light socket with the bulb as shown in the illustration to disconnect the assembly.
![]() |
Remove in this direction |
(c) Remove the side turn signal light bulb from the side turn signal light socket and wire as shown in the illustration.
![]() |
Remove in this direction |
Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Use the same procedure for the RH side as for the LH side.
- The procedure described below applies to the LH side.
PROCEDURE
1. INSTALL SIDE TURN SIGNAL LIGHT BULB
(a) Install the side turn signal light bulb into the side turn signal light socket as shown in the illustration.
![]() |
Install in this direction |
(b) Turn the side turn signal light socket with the bulb as shown in the illustration to reconnect the assembly.
![]() |
Install in this direction |
(c) Engage the claws to install the side turn signal light assembly as shown in the illustration.
![]() |
Install in this direction |
2. INSTALL OUTER REAR VIEW MIRROR COVER
Click here![]()
.png)
.png)