Relay
Inspection On Vehicle
INSPECTION ON VEHICLE
PROCEDURE
1. INSPECT FRONT FOG LIGHT RELAY
(a) Check the resistance. (1) Measure the resistance according to the value(s) shown in the table below. Standard resistance:
If the result is not as specified, replace the RH front fog light relay. |
![]() |
2. INSPECT HIGH BEAM/LOW BEAM SWITCH RELAY
(a) Check the resistance. (1) Measure the resistance according to the value(s) shown in the table below. Standard resistance:
If the result is not as specified, replace the high beam/low beam switch relay. |
![]() |
