Side Turn Signal Light Assembly
Components
COMPONENTS
ILLUSTRATION
*1 |
OUTER MIRROR COVER |
*2 |
SIDE TURN SIGNAL LIGHT BULB |
*3 |
SIDE TURN SIGNAL LIGHT ASSEMBLY |
*4 |
SIDE TURN SIGNAL LIGHT SOCKET |
Removal
REMOVAL
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
PROCEDURE
1. REMOVE OUTER MIRROR COVER
Click here![]()
2. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) Release the clips to detach the side turn signal light assembly as shown in the illustration.
![]() |
Remove in this direction |
(b) Turn the side turn signal socket with bulb to disconnect the assembly, then remove the side turn signal light assembly as shown in the illustration.
![]() |
Remove in this direction |
3. REMOVE SIDE TURN SIGNAL LIGHT BULB
(a) Remove the side turn signal bulb from the side turn signal socket. |
![]() |
Installation
INSTALLATION
PRECAUTION / NOTICE / HINT
HINT:
- Repeat the same procedure for the right side and the left side.
- The following procedure applies to the left side.
PROCEDURE
1. INSTALL SIDE TURN SIGNAL LIGHT BULB
(a) Install the side turn signal bulb into the side turn signal socket. |
![]() |
2. INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) Turn the side turn signal socket with bulb to connect the assembly, then install the side turn signal light assembly as shown in the illustration.
![]() |
Install in this direction |
(b) Engage the claws to install the side turn signal light assembly as shown in the illustration.
![]() |
Install in this direction |
3. INSTALL OUTSIDE REAR VIEW MIRROR HOLE COVER
Click here![]()
.png)


.png)