ECU Terminals
ECU TERMINALS
CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)
*A |
Main Body ECU (Multiplex Network Body ECU) with 2 connectors |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
2 connectors |
- |
- |
*A |
Main Body ECU (Multiplex Network Body ECU) with 1 connector |
- |
- |
*1 |
Main body ECU (multiplex network body ECU) |
- |
- |
*a |
1 connector |
- |
- |
(a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assy.
Click here![]()
(b) Reconnect the connectors to the instrument panel junction block assy.
(c) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
MB-11 (GND1) - Body ground |
- |
Ground |
Always |
Below 1 Ω |
MB-31 (BECU) - Body ground |
- |
Battery power supply |
Always |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition Switch in ACC position |
11 à 14 V |
MB-30 (ACC) - Body ground |
- |
ACC power supply |
Ignition Switch in OFF position |
Below 1 V |
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition Switch in ON position |
11 à 14 V |
MB-32 (IG) - Body ground |
- |
IG power supply |
Ignition Switch in OFF position |
Below 1 V |
(d) Reinstall the main body ECU (multiplex network body ECU) onto the instrument panel junction block assy.
Click here![]()
(e) Measure the voltage according to the value(s) in the table below.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
3H-8 (ACT-) - Body ground |
LA-B - Body ground |
Door lock motor UNLOCK control output |
Door control switch or driver door lock cylinder OFF |
Below 1 V |
3H-8 (ACT-) - Body ground |
LA-B - Body ground |
Door lock motor UNLOCK control output |
Door control switch or driver door lock cylinder unlocked |
11 à 14 V |
3H-9 (ACT-) - Body ground |
B - Body ground |
Door lock motor UNLOCK control output |
Door control switch or driver door lock cylinder OFF |
Below 1 V |
3H-9 (ACT-) - Body ground |
B - Body ground |
Door lock motor UNLOCK control output |
Door control switch or driver door lock cylinder unlocked |
11 à 14 V |
3H-6 (ACT+) - Body ground |
R - Body ground |
Door lock motor LOCK control output |
Door control switch or driver door lock cylinder OFF |
Below 1 V |
3H-6 (ACT+) - Body ground |
R - Body ground |
Door lock motor LOCK control output |
Door control switch or driver door lock cylinder locked |
11 à 14 V |
3H-18 (ACT+) - Body ground |
R - Body ground |
Door lock motor LOCK control output |
Door control switch or driver door lock cylinder OFF |
Below 1 V |
3H-18 (ACT+) - Body ground |
R - Body ground |
Door lock motor LOCK control output |
Door control switch or driver door lock cylinder locked |
11 à 14 V |
3D-4 (ACTD) - Body ground |
B - Body ground |
Door lock motor UNLOCK control output |
Door control switch or driver's door key cylinder OFF → ON (unlock) |
Below 1 V → 11 to 14 V → Below 1 V |
F15-6 (FLCY) - Body ground |
R - Body ground |
Front door (left) courtesy light switch input voltage |
Front left door open |
Below 1 V |
F15-6 (FLCY) - Body ground |
R - Body ground |
Front door (left) courtesy light switch input voltage |
Front left door closed |
Pulse generation |
F15-27 (FRCY) - Body ground |
BR - Body ground |
Front door (right) courtesy light switch input voltage |
Front right door open |
Below 1 V |
F15-27 (FRCY) - Body ground |
BR - Body ground |
Front door (right) courtesy light switch input voltage |
Front right door closed |
Pulse generation |
3H-24 (LCTY) - Body ground |
BR - Body ground |
Rear door courtesy light switch input voltage (left) |
Rear LH door open |
Below 1 V |
3H-24 (LCTY) - Body ground |
BR - Body ground |
Rear door courtesy light switch input voltage (left) |
Rear LH door closed |
Pulse generation |
3A-31 (RCTY) - Body ground |
BR - Body ground |
Rear door courtesy light switch input voltage (right) |
Rear RH door open |
Below 1 V |
3A-31 (RCTY) - Body ground |
BR - Body ground |
Rear door courtesy light switch input voltage (right) |
Rear RH door closed |
Pulse generation |
3D-13 (LSFL) - Body ground |
B - Body ground |
Front LH door unlock detection switch input |
Front LH door unlocked |
Below 1 V |
3D-13 (LSFL) - Body ground |
B - Body ground |
Front LH door unlock detection switch input |
Front LH door locked |
Pulse generation |
3D-12 (LSFR) - Body ground |
GR - Body ground |
Front RH door unlock detection switch input |
Front RH door unlocked |
Below 1 V |
3D-12 (LSFR) - Body ground |
GR - Body ground |
Front RH door unlock detection switch input |
Front RH door locked |
Pulse generation |
3D-14 (LSR) - Body ground |
LG - Body ground |
Rear door unlock detection switch input (left/right) |
Left or right rear door unlocked |
Below 1 V |
3D-14 (LSR) - Body ground |
LG - Body ground |
Rear door unlock detection switch input (left/right) |
Left or right rear door locked |
Pulse generation |
F15-5 (PRG) - Body ground |
GR - Body ground |
Signal output to door control and tire pressure monitoring receiver assembly |
Key inserted into ignition switch → key removed from ignition switch |
11 to 14 V → Pulse generation → 11 to 14 V |
F15-4 (RDA) - Body ground |
LG - Body ground |
Signal input from door control and tire pressure monitoring receiver assembly |
Ignition switch OFF, all doors closed and door control transmitter assembly switch not pressed |
11 à 14 V |
Ignition switch OFF, all doors closed and door control transmitter assembly switch pressed |
Pulse generation (0 à 12 V) |
|||
3A-41 (KSW) - Body Ground |
V - Body ground |
Key Unlock Warning Switch Input |
No key in ignition key cylinder |
Pulse generation |
3A-41 (KSW) - Body Ground |
V - Body ground |
Key Unlock Warning Switch Input |
Key in ignition key cylinder |
Below 1 V |
3F-29 (BZR) - Body ground*1 |
L - Body ground |
Remote Door Lock Buzzer |
Wireless door lock buzzer OFF |
Below 1 V |
3F-29 (BZR) - Body ground*1 |
L - Body ground |
Remote Door Lock Buzzer |
Wireless door lock buzzer ON |
Pulse generation |
- *1: with Toyota Safety Sense P system
If the result does not conform to the specifications, there may be a malfunction in the main body ECU (multiplex network body ECU) or the instrument panel junction block assembly.
INSPECT DOOR CONTROL RECEIVER AND TIRE PRESSURE MONITOR SYSTEM ASSEMBLY
(a) Disconnect connector M23 from the door control and tire pressure monitoring receiver assembly.
(b) Measure the voltage and resistance according to the value(s) specified in the table below.
HINT:
Measure the values at the wire harness side with the connectors disconnected.
Tester Connection | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
M23-7 (+B) - Body ground |
R - Body ground |
Battery power supply |
Always |
11 à 14 V |
M23-12 (GND) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Reconnect connector M23 to the door control and tire pressure monitoring receiver assembly.
(d) Measure the voltage according to the value(s) specified in the table below.
Terminal No. (Symbol) | Wire Color | Terminal Description | Condition | Specified Condition |
|---|---|---|---|---|
M23-5 (PRG) - M23-12 (GND) |
W - W-B |
Signal input from main body ECU (multiplex network body ECU) |
Key inserted into ignition switch → key removed from ignition switch |
11 to 14 V → Pulse generation → 11 to 14 V |
M23-4 (RDA) - M23-12 (GND) |
G - W-B |
Signal output from main body ECU (multiplex network body ECU) |
Ignition switch OFF, all doors closed and door control transmitter assembly switch not pressed |
11 à 14 V |
Ignition switch OFF, all doors closed and door control transmitter assembly switch pressed |
Pulse generation (0 à 12 V) |