Door Lock

Symptom Table

~2min read

SYMPTOM TROUBLESHOOTING TABLE

HINT:

  • Use the table below to determine the cause of the symptoms. If several suspected areas are listed, the possible causes of the symptom are shown in order of probability in the "Suspected Area" column of the table. Check each symptom, verifying the suspected areas in the order listed. Replace parts if necessary.
  • Check the fuses and relays associated with this system before checking the suspected areas listed below.

Symptom

Suspected Area

Link

Only the remote control function does not operate

Go to "Only the remote control function does not operate"

Only the automatic response function does not operate correctly

Follow the "No automatic response" procedure

Only the automatic locking function does not operate correctly

Perform an operation check

Key Reminder System

Illumination system (front door step light switch circuit)

Illumination system (rear door step light switch circuit)

Main body ECU (multiplex network body ECU)

-

Only the door courtesy light function does not operate

Perform an operation check

Headlight System

Main body ECU (multiplex network body ECU)

-

Only the door ajar warning light function does not operate*1

Perform an operation check

Illumination system (door step light switch circuit)

Main body ECU (multiplex network body ECU)

-

Only the panic alarm function does not operate.*1

Perform an operation check

Lighting system (Int) (interior light)

Lighting system (EXT) (headlights, tail lights, hazard lights)

Horn System

Instrument Panel Junction Block Assembly

-

Main body ECU (multiplex network body ECU)

-

When you return to the vehicle, the doors were unlocked even though no door unlock operation was performed.

Go to the "Malfunction Operation" procedure

When you return to the vehicle, the doors were locked even though no door lock operation was performed.

Go to the "Malfunction Operation" procedure

  • *1: with Toyota Safety Sense P system