Diagnostic System
DIAGNOSTIC SYSTEM
CHECK DLC3
(a) Check DLC3.
Click here![]()
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery.
DIAGNOSTIC MODE (WITH TECHSTREAM)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Main Body / Wireless Door Lock Diagnosis Mode.
Body Electrical > Main Body > UtilityWireless Door Lock Diagnosis Mode
(e) Proceed to the next step as instructed on the Techstream screen.
(f) Check whether the system has entered self-diagnosis mode by checking the interior light display sequence.
(g) Check the diagnostic transmission when the door control transmitter assembly switch is pressed. The diagnostic transmission can be checked using the interior light illumination patterns.
ResultInterior Light Output | Suspected Area |
|---|---|
A |
Normal (no malfunction) |
B |
Register Remote Control Code |
C |
Radio wave interference or malfunction of a related component |