Network Operation

How to Use Troubleshooting

~2min read

PRECAUTION / NOTICE / HINT

HINT:

  • Perform the following procedure to troubleshoot the LIN communication system.
  • *: Use the Techstream.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

HINT:

  • When troubleshooting, make sure the symptoms of the problem have been correctly identified. Any preconceptions must be set aside in order to make an accurate judgment. To clearly understand the actual symptoms of the problem, it is essential to ask the customer about the nature of the problem and the conditions under which it occurred.
  • Gather as much information as possible for reference. Previous problems that do not appear related to the current problem may also be very useful in some cases.
  • The following 5 elements are essential for analyzing the problem:

What

Vehicle model, system name

When

Date, time, frequency of occurrence

Where

Road conditions

What were the conditions?

Driving conditions, weather conditions

How did it happen?

Problem Symptoms

NEXT
  1. PRELIMINARY CHECKS

(a) Measure the battery voltage.

Standard voltage:

11 à 14 V

If the voltage is below 11 V, charge or replace the battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connectors and terminals to make sure there are no abnormalities such as loose connections or deformation.

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM FUNCTION*

(a) Using the Techstream, check for DTCs related to the CAN communication system.

Click here

Result:

Result

Proceed to

No CAN system DTCs are output

A

CAN-related DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

A
  1. CHECK LIN COMMUNICATION SYSTEM COMMUNICATION FUNCTION*

(a) Using the Techstream, check for DTCs related to the LIN communication system.

Click here

Result:

Result

Proceed to

LIN system DTCs are not output

A

LIN-related DTCs are output

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A
  1. GENERAL ANALYSIS AND TROUBLESHOOTING*

(a) ECU terminals

Click here

(b) Data List/Active Test

Click here

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END