Network Operation
Diagnostic System
In this manual: Network Operation
~1min read
DIAGNOSTIC SYSTEM
DESCRIPTION
The main body ECU (multiplex network body ECU) and the certification ECU (smart key system ECU assembly) control the LIN communication system. LIN communication system data and diagnostic trouble codes (DTCs) can be read via the data link connector 3 (DLC3).
If the system does not appear to be operating normally, use the Techstream to troubleshoot and repair any malfunctions.
CHECK DLC3
(a) Check DLC3.
Click here![]()
CHECK BATTERY VOLTAGE
(a) Measure the battery voltage.
Standard voltage:
11 à 14 V
If the voltage is below 11 V, charge or replace the battery.
Was this page helpful?