Network Operation

System Description

~2min read

SYSTEM DESCRIPTION

LIN COMMUNICATION SYSTEM DESCRIPTION

The LIN communication system provides communication between the components listed in the tables below. If communication via the LIN communication is not possible, such as due to an open or short circuit in the communication line, the main control ECU of the relevant system stores a DTC. Refer to the table below for the communication bus lines and connected components.

HINT:

  • Each component has a fail-safe function that activates in the event of a malfunction to protect the system and allow communication between the other components to continue operating.
  • In the following table, the symbol "○" indicates that the function applies. The symbol "-" indicates that it does not apply.
Door bus lines

Component

Main Control

LIN Communication DTC Output Function

Main body ECU (multiplex network body ECU)

○

○

Power Window Regulator Motor Assembly (for driver side door)

-

-

Power Window Regulator Motor Assembly (for front passenger side door)

-

-

Power Window Regulator Motor Assembly (for rear LH door)

-

-

Power Window Regulator Motor Assembly (for rear RH door)

-

-

Multiplex Network Master Switch Assembly

-

-

Double Lock Door Control Relay Assembly*1

-

-

  • *1: with double lock system
Certification bus lines (with Smart Key System)

Component

Main Control

LIN Communication DTC Output Function

Certification ECU (Smart Key ECU Assy)

○

○

Steering lock ECU (steering lock actuator or upper bracket assembly)

-

-

ID code box (immobiliser code ECU)

-

-