Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
HINT:
The Techstream Data List allows you to read the values or status of switches, sensors, actuators and other components without removing any parts. This non-intrusive check can be very useful, since intermittent conditions or signals can be identified before parts or wiring are moved. Reading the Data List during troubleshooting saves time in diagnosis.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not determine whether a part is faulty based only on these reference values.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menus: Body Electrical / Main Body or Master Switch / Data List.
(e) Read the Data List by following the instructions on the Techstream.
Body Electrical > Main Body > Data ListTester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
ACC SW |
Ignition Switch ACC Position Signal |
OFF or ON |
OFF: Ignition switch in OFF position ON: Ignition switch in ACC position. |
- |
IG SW |
Ignition Switch ON Position Signal |
OFF or ON |
OFF: Ignition switch in OFF or ACC position. ON: Ignition switch in ON position |
- |
RR Door Courtesy SW |
Rear door (RH) courtesy light switch signal |
OFF or ON |
OFF: Right rear door closed. ON: Right rear door open. |
- |
RL Door Courtesy SW |
Rear door (LH) courtesy light switch signal |
OFF or ON |
OFF: Left rear door closed. ON: Left rear door open. |
- |
Back Door Courtesy SW |
Back door courtesy light switch signal |
OFF or ON |
OFF: Back door closed. ON: Back door open. |
- |
Back Door Open |
Back door lock signal |
Prohibit or Permit |
Prohibit: Back door is locked Permit: Back door is unlocked |
- |
D Seat Buckle SW |
Driver side seat belt buckle signal |
OFF or ON |
ON: Driver side seat belt not buckled OFF: Driver side seat belt buckled |
- |
Door Lock SW-Lock |
Door control switch assembly lock signal |
OFF or ON |
OFF: Door control switch assembly lock side not pressed ON: Door control switch assembly lock side pressed |
- |
Door Lock SW-Unlock |
Door control switch assembly unlock signal |
OFF or ON |
OFF: Door control switch assembly unlock side not pressed ON: Door control switch assembly unlock side pressed |
- |
Door Key SW-Lock |
Driver door key lock/unlock switch lock signal |
OFF or ON |
OFF: Driver side door cylinder not turned to lock position ON: Driver's door lock cylinder set to lock position |
- |
D Door Key SW-UL |
Driver door key lock/unlock switch unlock signal |
OFF or ON |
OFF: Driver side door cylinder not turned to unlock position ON: Driver's door lock cylinder set to unlock position |
- |
FR Door Lock Pos |
Front Right Door Unlock Detection Switch Signal |
LOCK or UNLOCK |
LOCK: Front right door locked. UNLOCK: Front right door unlocked. |
- |
FR Door Courtesy SW |
Front door (RH) courtesy light switch signal |
OFF or ON |
OFF: Front RH door closed ON: Front RH door open |
- |
FL Door Lock Pos |
Front Left Door Unlock Detection Switch Signal |
LOCK or UNLOCK |
LOCK: Front left door locked. UNLOCK: Front left door unlocked. |
- |
FL Door Courtesy SW |
Front door (LH) courtesy light switch signal |
OFF or ON |
OFF: Front left door closed ON: Front left door open |
- |
Back Door Open Handle SW |
Back Door Opening Switch Signal |
OFF or ON |
OFF: Back door closed. ON: Back door open. |
- |
RR-Door Lock Pos SW |
Rear Left and Right Door Unlock Detection Switch Signal |
OFF or ON |
OFF: Rear right and left doors locked. ON: Rear right or left door unlocked. |
*1 |
RL-Door Lock Pos SW |
Rear Left and Right Door Unlock Detection Switch Signal |
OFF or ON |
OFF: Rear right and left doors locked. ON: Rear right or left door unlocked. |
*2 |
Unlock Key Twice |
Key-linked two-stage door unlock function |
OFF or ON |
Customised setting displayed |
- |
- *1: When checking the rear door (RH) lock position switch, be sure to perform the check with the rear door (LH) locked.
- *2: When checking the rear door (LH) lock position switch, be sure to perform the check with the rear door (RH) locked.
Tester display | Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Door Lock Switch Status |
Multiplex network master switch assembly lock signal |
OFF or ON |
OFF: Multiplex network master switch assembly lock side not pressed ON: Multiplex network master switch assembly lock side pressed |
- |
Door Unlock Switch Status |
Multiplex network master switch assembly unlock signal |
OFF or ON |
OFF: Multiplex network master switch assembly unlock side not pressed ON: Multiplex network master switch assembly unlock side pressed |
- |
ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing parts. This non-intrusive functional check can be very useful, because intermittent operation can be identified before parts or wiring are moved. Performing Active Tests at the start of troubleshooting saves time during diagnosis. Data List information can be displayed during Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn on the Techstream.
(d) Select the following menu items: Body Electrical / Main Body / Active Test.
(e) Perform the Active Test by following the Techstream instructions.
Body Electrical > Main Body > Active TestTester display | Item | Control Range | Diagnostic Note |
|---|---|---|---|
Door Lock |
Door Lock Motor |
OFF / Unlock / Lock |
- |
D-Door Unlock |
Driver Door Lock Motor |
OFF / ON |
- |
Trunk and Back-Door Open |
Trunk Lock Motor |
OFF / ON |
- |