Door Lock

System Description

~5min read

SYSTEM DESCRIPTION

DOOR CENTRAL LOCKING SYSTEM DESCRIPTION

(a) The door central locking system locks/unlocks all doors.

The main body ECU (multiplex network body ECU) receives lock/unlock request signals from a door control switch or from the driver's door key lock and unlock switch. The main body ECU (multiplex network body ECU) then sends these request signals to the door lock motor of each door to lock/unlock the doors based on the input signals.

FUNCTION OF MAIN COMPONENTS

Component

Function

Multiplex Network Master Switch Assembly

  • Door Control Switch

The driver's side door control switch of the multiplex network master switch assembly locks or unlocks all doors.

Door Control Switch Assembly

Located on the front passenger door and locks or unlocks all doors.

Door Courtesy Light Switch Assembly

  • Located on each door.
  • Detects the door position (open or closed) and sends data to the main body ECU (multiplex network body ECU).
  • Illuminates when the door is open and turns off when the door is closed.

Front Door Lock Assembly LH with Motor

  • The built-in motor locks or unlocks the door.
  • The built-in key door lock and unlock switch (linked to the key) detects the operating state of the door key (locked or unlocked) and sends a signal to the main body ECU (multiplex network body ECU).
  • The integrated unlock detection switch detects the door status (locked or unlocked) and sends a signal to the main body ECU (multiplex body ECU). This switch turns off when the door is locked and turns on when the door is unlocked.

Front door lock assembly RH with motor

Rear door lock assembly LH/RH with motor

  • Has a built-in motor that locks or unlocks the door.
  • The integrated unlock detection switch detects the door status (locked or unlocked) and sends a signal to the main body ECU (multiplex body ECU). This switch turns off when the door is locked and turns on when the door is unlocked.

Airbag sensor assembly*1

Sends the front passenger seat belt buckle switch signal to the main body ECU (multiplex body ECU) via CAN communication.

Back door lock assembly

The built-in motor locks or unlocks the door.

  • *1: with Toyota Safety Sense P system

SYSTEM OPERATION

(a) This system is controlled by the main body ECU (multiplex body ECU). The main body ECU (multiplex body ECU) sends signals to each door lock motor. The power door lock control system has the following functions:

Function

General Description

Manual lock and unlock function

This function locks or unlocks all doors by operating the door control switch.

Key-linked door lock and unlock function

This function, linked to the mechanical key cylinder, locks or unlocks all doors when the lock or unlock operation is performed.

Manual unlock inhibit function

When the conditions below are met, unlocking the vehicle using the door control switch will be inhibited:

  • The doors are locked by key-linked operation, remote operation, or with all doors closed.

Key lock-out prevention function

When the key is inside the vehicle, operating the door lock does not lock the door.*1

When the key is inserted in the ignition key cylinder, operating the door lock does not lock the door.*2

Key-linked two-stage door unlock function

Unlocks only the driver's door when the key cylinder is turned once, and unlocks all doors when it is turned twice.

Double lock function*3

  • This function prevents the doors from being opened using the interior door handles. As a result, the doors cannot be opened from either the inside or the outside of the vehicle.
  • To lock the doors with this function, press the lock switch on the electronic key transmitter twice within 5 seconds, or touch the lock sensor on the outside door handle twice within 5 seconds while holding the key, to activate the double lock function. However, in case of emergency unlocking, only the driver's door can be unlocked with the key.

NOTICE:

Never activate the double lock function when a person is inside the vehicle, as the doors cannot be opened from the inside. If the doors are locked accidentally, unlock the door using the remote unlock operation or the door handle unlock operation.

  • *1: with Smart Key System
  • *2: Without smart key system
  • *3: without Toyota Safety Sense P system