Maintenance

Removal

~2min read

REMOVAL

PRECAUTION / NOTICE / HINT

NOTICE:

  • Immediately after installing the brake pads, braking performance may be reduced. Always perform a road test in a safe area, paying attention to the surroundings.
  • Immediately after installing the front disc brake pads, the brake pedal may feel soft due to the clearance between the front disc brake pads and the front disc. Depress the brake pedal several times until the pedal feels firm.

HINT:

  • Repeat the same procedure for the right side and the left side.
  • The following procedure applies to the left side.

PROCEDURE

1. REMOVE FRONT WHEEL

Click here

2. REMOVE FRONT DISC BRAKE PAD

CAUTION:

  • After lifting up the front disc brake caliper assembly, place it in position before working on it.
  • The front disc brake caliper assembly may fall and cause serious injury to your hands or fingers.

(a) Hold the front disc brake caliper slide pin (lower side) and remove the bolt.

NOTICE:

Do not kink or damage the brake line.

*a

Turn

*b

Hold

(b) Pull the front disc brake caliper assembly upward.

(c) Remove the 2 front disc brake pads from the front disc brake caliper bracket.

3. REMOVE FRONT DISC BRAKE ANTI-SQUEAL SHIM KIT

(a) Remove the No. 1 front disc brake anti-squeal shim and the No. 2 front disc brake anti-squeal shim from each front disc brake pad.

(b) Remove the 2 front brake pad radial springs from each front disc brake pad.