Maintenance

Installation

~2min read

INSTALLATION

PROCEDURE

1. INSTALL REAR WIPER RUBBER

(a) Install the 2 rear backing plates onto the rear wiper rubber.

Install in this direction

NOTICE:

Install the backing plates in the correct direction.

(b) Insert the rear wiper rubber with the 2 rear wiper rubber backing plates through the second claw from the front of the rear wiper blade, then push it through each claw to the rear claw.

*a

Second claw

*b

Stopper

Install in this direction (1)

Install in this direction (2)

Install in this direction (3)

-

-

(c) After pushing the rear wiper rubber through the rear claw, pull it slightly over the rear stopper.

(d) Slide the rear wiper rubber through the front claw.

(e) Correctly engage the rear wiper blade claw in the groove of the rear wiper rubber as shown in the illustration.

HINT:

  • If the front claw of the rear wiper blade is not in the groove of the rear wiper rubber, grip the rear wiper rubber and slide it up and down several times to insert the claw into the groove.
  • Applying a thin coat of washer fluid to the rear wiper rubber makes it easier to insert the claw into the groove.

*a

Correct

*b

Incorrect

2. INSTALL REAR WIPER BLADE

(a) Push the rear wiper blade as shown in the illustration to install it on the rear wiper arm.

Install in this direction

(b) Engage the claw to install the rear wiper blade, as shown in the illustration.

NOTICE:

Be careful not to damage the claw.

(c) Lower the rear wiper blade and arm assembly, as shown in the illustration.