Toyota Land Cruiser Quiz
Body Electrical

Front differential side gear shaft oil seal

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
4special tools
0408012016020013197N·mlb·ft
Tightening torque found on this page

COMPONENTS

COMPONENTS

REPLACEMENT

1. REMOVE FRONT WHEELS

Torque: 131 N·m

2. REMOVE FRONT DRIVE SHAFT (SA-26 )

3. REPLACE OIL SEAL

REPLACE OIL SEAL

(a) Using SST, remove the oil seal.

SST 09308-00010

(b) Coat the hypoid gear oil to a new oil seal periphery.

REPLACE OIL SEAL

(c) Using SST and a hammer, install the new oil seal.

SST 09550-00032, 09950-70010 (09951-07100)

(d) Coat the MP grease to the oil seal lip.

4. INSTALL FRONT DRIVE SHAFT (SA-33 )

5. FILL DIFFERENTIAL WITH HYPOID GEAR OIL

FILL DIFFERENTIAL WITH HYPOID GEAR OIL

Torque: 49 N·m Oil type: Hypoid gear oil API GL-5

Recommended oil viscosity: Above -18C (0F) SAE 90 Below -18C (0F) SAE 80W-90 or 80W Capacity: 1.70 liters (1.80 US qts, 1.50 lmp.qts)

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.