Toyota Land Cruiser Quiz
Body Electrical

Rear upper and lower control ARM

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
0408012016020013197N·mlb·ft
Tightening torque found on this page

COMPONENTS

COMPONENTS

INSTALLATION

Installation is in the reverse order of removal (SA-182 ).

REMOVAL

1. REMOVE REAR WHEEL

Torque: 131 N·m

2. SUPPORT REAR AXLE HOUSING WITH JACK

3. REMOVE UPPER CONTROL ARM

(a) Disconnect the ABS speed sensor wire harness.

(b) RH side: Remove the bolt and heat insulator.

Torque: 18 N·m

REMOVE UPPER CONTROL ARM

(c) Remove the 2 nuts, washers, bolts and upper control arm.

Torque: 150 N·m

HINT: At the time of installation, after stabilizing the suspension, torque the nuts.

4. REMOVE LOWER CONTROL ARM

REMOVE LOWER CONTROL ARM

Remove the 2 nuts, washers, bolts and lower control arm.

Torque: 150 N·m

HINT: At the time of installation, after stabilizing the suspension, torque the nuts.

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.