Toyota Land Cruiser Quiz
Body Electrical

Rear wheel hub bolt

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
0408012016020010376N·mlb·ft
Tightening torque found on this page

REPLACEMENT

1. REMOVE REAR WHEEL

2. REMOVE BRAKE CALIPER AND DISC

REMOVE BRAKE CALIPER AND DISC

(a) Remove the 2 bolts, brake caliper and disc.

(b) Support the brake caliper securely.

3. REMOVE HUB BOLT

REMOVE HUB BOLT

Using a brass bar and hammer, remove the hub bolt.

4. INSTALL HUB BOLT

INSTALL HUB BOLT

Install a washer and nut to a new hub bolt, as shown in the illustration, and install the hub bolt by torquing the nut.

5. INSTALL DISC AND BRAKE CALIPER

Install the disc and brake caliper with the 2 bolts.

Torque: 103 N·m

6. INSTALL REAR WHEEL

Torque: 131 N·m

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.