Toyota Land Cruiser Quiz
Body Electrical

Front wheel hub bolt

In this manual: Body Electrical
Introduction — 13Preparation — 19Service specifications — 19Engine Mechanical — 28Automatic Transmission — 22Body Electrical — 373Brake — 34Propeller Shaft — 7Transfer — 24Motor shift control system — 1Steering — 34Ignition — 7Charging — 9Emission Control — 6Cooling — 17Starting — 12Lubrication — 13Maintenance — 7Chassis — 1Disassembly — 1
~1min read
03060901201507455N·mlb·ft
Tightening torque found on this page

REPLACEMENT

1. REMOVE FRONT AXLE HUB (SA-12 )

2. REMOVE HUB BOLT

REMOVE HUB BOLT

(a) Mount the axle hub with the disc in a soft jaw vice.

NOTICE: Close vice until it holds disc, do not tighten further.

(b) Place matchmarks on the axle hub and disc.

(c) Remove the 5 bolts and separate the axle hub from the disc.

REMOVE HUB BOLT

(d) Using a press, remove the hub bolt.

3. INSTALL HUB BOLT

INSTALL HUB BOLT

(a) Using an extension bar and press, install a new hub bolt.

INSTALL HUB BOLT

(b) Align the matchmarks on the axle hub and disc.

(c) Install the 5 bolts to the axle hub.

Torque: 74 N·m

4. INSTALL FRONT AXLE HUB (SA-16 )

Test yourself

A quick Toyota Land Cruiser quiz: every answer comes with an explanation and a link to the manual page.