Toyota Sienna Quiz
Audio / visual

AVC-LAN Circuit

In this manual: Audio / visual
Introduction — 55Service specifications — 7Maintenance — 7Engine — 264U151e automatic transaxle — 108Transfer — 19Propeller shaft — 8Drive shaft — 14Differential — 16Axle — 18Suspension — 37Tire and wheel — 54Brake control — 141Parking brake — 16Steering Column — 11Power steering — 18Air conditioning — 106Supplemental restraint system — 146Seat belt — 22Theft deterrent — 14Engine immobiliser — 17Cruise control — 65Lighting — 61Wiper and washer — 13Door lock — 42Meter — 28Audio / visual — 94Navigation — 108Park assist / monitoring — 33Horn — 5Garage door opener — 42GR-FE Engine control system — 126Supplemental restraint system — 147Other system — 14Windshield / windowglass — 43Mirror — 23Instrument panel — 6Seat belt — 22Seat — 92Engine hood / door — 104Exterior — 39Interior — 5Sliding roof — 9Multiplex communication — 18Can communication — 23
5steps
~30min
2/5difficulty
Done 0 of 5

DESCRIPTION

Each unit of the audio system connected to the AVC-LAN (communication bus) transfers the signal of each switch by communication.

When a short to +B or short to ground occurs in this AVC-LAN, the audio system will not function normally as the communication is discontinued.

INSPECTION PROCEDURE

1 INSPECT RADIO RECEIVER

INSPECT RADIO RECEIVER
  1. Disconnect the radio receiver connectors.
  2. Measure the resistance according to the value(s) in the table below.

Standard resistance

Standard resistance

*1: 10 Speaker System

2 CHECK HARNESS AND CONNECTOR

HINT: For details of the connectors, refer to the "TERMINALS OF ECU"

  1. Referring to the AVC-LAN wiring diagram below, check all AVC-LAN circuits.
  2. Disconnect all connectors in all AVC-LAN circuits.
  3. Check for an open or short in all AVC-LAN circuits.

OK: There is no open or short circuit

CHECK HARNESS AND CONNECTOR

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Test yourself

A quick Toyota Sienna quiz: every answer comes with an explanation and a link to the manual page.