Toyota Tacoma Quiz
Lighting

Removal

In this manual: Lighting
Introduction — 15Maintenance — 8Audio / Video — 94Garage Door Opener — 7Navigation / Multi Info Display — 84Park Assist / Monitoring — 86Brake — 50Brake Control / Dynamic Control Systems — 165Parking Brake — 52gr-fks Charging — 252gr-fks Cooling — 212gr-fks Emission Control — 132gr-fks Engine Control — 322gr-fks Engine Mechanical — 332gr-fks Exhaust — 92gr-fks Fuel — 422gr-fks Ignition — 62gr-fks Intake — 72gr-fks Lubrication — 152gr-fks Starting — 38Ac60e Automatic Transmission / Transaxle — 146Axle — 19Clutch — 20Cruise Control — 168Differential — 50Drive Shaft — 6Propeller Shaft — 23Rc62f Manual Transmission / Transaxle — 34Suspension — 22Tire And Wheel — 39Vf2cm Transfer — 44Can Communication — 45Multiplex Communication — 20Power Distribution — 5Power Steering — 29Steering Column — 29Air Conditioning — 108Door Lock — 88Engine Hood / Door — 16Engine Immobiliser — 47Exterior — 55Horn — 5Interior — 18Interior Panel — 8Lighting — 93Meter / Gauge / Display — 31Mirror — 22Other System — 24Pre-collision — 40Seat — 52Seat Belt — 40Sliding Roof — 26Supplemental Restraint Systems — 139Theft Deterrent — 20Window / Glass — 53Wiper / Washer — 24
~1min read
REMOVAL PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

for Double Cab:

Click here for Access Cab:

for Access Cab:

Click here 2. REMOVE COWL SIDE TRIM BOARD LH

2. REMOVE COWL SIDE TRIM BOARD LH

Click here 3. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

3. REMOVE INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY

Click here 4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Click here 5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

5. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

Click here 6. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

6. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

Click here 7. REMOVE AUTO HIGH BEAM SWITCH

7. REMOVE AUTO HIGH BEAM SWITCH

(a) Detach the 2 claws and remove the auto high beam switch from the instrument

(a) Detach the 2 claws and remove the auto high beam switch from the instrument panel lower finish panel sub-assembly.

Test yourself

A quick Toyota Tacoma quiz: every answer comes with an explanation and a link to the manual page.