Lost Communication with Meter (B1324)
DESCRIPTIONThis DTC is stored when a communication error occurs between the navigation receiver assembly and combination meter assembly.
WIRING DIAGRAM
NOTICE: When replacing the combination meter assembly, make sure to replace it with a new one. PROCEDURE
(a) Disconnect the J136 navigation receiver assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
(d) Measure the voltage according to the value(s) in the table below. Standard Voltage:
(a) Remove the combination meter assembly. Click here
(a) Remove the navigation receiver assembly. Click here
(a) Replace the combination meter assembly with a new one. Click here (b) Clear the DTCs. Click here (c) Check for DTCs. OK: No DTCs are output.
|

