Audio, Visual, Telematics

No Sound can be Heard from Speakers

~1min read

HINT:

When the "iPhone" is connected to the USB port of the No. 1 stereo jack adapter, Entune audio may not be output. Before performing troubleshooting, disconnect the "iPhone" connected to the USB port of the No. 1 stereo jack adapter, change the audio output source of the "iPhone" or turn the ignition switch off and then ON again.

PROCEDURE

  1. CHECK AUDIO SETTINGS

(a) In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.

OK:

Audio system returns to normal.

HINT:

Sound quality adjustment measures vary according to the type of amplifier.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE