Speed Signal Malfunction (B15C2)
DESCRIPTIONThe navigation receiver assembly receives a vehicle speed signal from the combination meter assembly and information from the navigation antenna assembly, and then adjusts the vehicle position. The navigation receiver assembly stores this DTC when the difference between the speed information that the navigation antenna assembly receives and the SPD pulse received from the combination meter assembly becomes large. HINT:
WIRING DIAGRAM
PROCEDURE
(b) While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal. OK: The readings are equal or almost equal. Result
(a) Disconnect the J135 navigation receiver assembly connector. (b) Disconnect the J28 combination meter assembly connector. (c) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|

