After replacing the stereo component tuner assembly of vehicles subscribed to pay-type satellite radio broadcasts, XM radio ID registration is necessary (w/ SDARS System).
HINT:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Display Function
Symptom
Suspected Area
See page
Pressing ignition switch does not turn on system
Proceed to "Navigation Receiver Assembly Power Source Circuit"
Vehicle position mark deviates from and returns to correct position repeatedly even though GPS mark is displayed
Proceed to "GPS Mark is not Displayed"
Drive the vehicle for sensor learning (At a place where GPS signals can be received, drive the vehicle clockwise and counterclockwise in at least a 200 meter square 2 times or more)
When the HD radio is playing, cover art may not be displayed
When a song unregistered to the Gracenote CDDB is playing or cover art information is not provided by the broadcast station, its cover art cannot be displayed
-
When the HD radio is playing, cover art cannot be displayed
When the ignition switch is turned to ACC, instructions for checking the connection condition between the in-vehicle device and cellular phone are displayed
Turn the cellular phone connection conformation display on the in-vehicle device off
-
Phonebook data cannot be transferred
Check that the phonebook automatic transfer setting of the in-vehicle device is on
-
Enter "1234" into the "Bluetooth" phone (when transferring phonebook data, OBEX authentication may be required)
-
Check that no applications on the cellular phone are running
-
If using "Bluetooth" audio function, cancel the "Bluetooth" audio player connection and check the operation
Caller's voice (your voice) is interrupted by noise or sound quality is poor
Check the transmitting voice volume (if it is too high, voice may sound distorted)
-
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
-
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
Proceed to "Cellular Phone Inspection"
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
Other caller cannot hear your voice
When talking on the cellular phone, check that the mute button is not pressed
-
Check that nothing can cause noise around the microphone (an outlet of the air conditioning system facing the microphone, wind from an open window, additional devices, etc. may affect noise occurrence)
-
Proceed to "Check Hands-free Voice Quality Setting" in Operation Check
Proceed to "Cellular Phone Inspection"
Proceed to "Microphone Circuit between Microphone and Navigation Receiver Assembly"
No notification when a new SMS/MMS/e-mail has been received
Check the SMS/MMS/e-mail notification settings on the cellular phone and the Navigation receiver assembly
Set opening image or screen off image is not displayed
Check if it is the first start-up after disconnecting and reconnecting the +B terminal (reading from the SD card may be slow when the system is first starting-up)
Thumbnail images for opening image or screen off image are not displayed on setting screen
Check if it is the first start-up after disconnecting and reconnecting the +B terminal (reading from the SD card may be slow when the system is first starting-up)
Entune function does not operate properly (no sound is output although the Entune screen is displayed properly)
If the "iPhone" is connected to the USB port of the No. 1 stereo jack adapter, Entune audio may not be output. Therefore, disconnect the "iPhone" from the USB port of the No. 1 stereo jack adapter, change the audio output source of the "iPhone" or turn the ignition switch off and then to ON again.