Brake Control / Dynamic Control Systems

ABS Control System Malfunction (43)

~1min read
DESCRIPTION

This DTC is output when the VSC system detects a malfunction in the ABS control system.

DTC Code

DTC Detection Condition

Trouble Area

43

Malfunction in the ABS control system.

ABS control system

PROCEDURE
  1. CHECK ABS CONTROL SYSTEM

(a) Clear the DTCs (See page ).


(b) Turn the ignition switch to ON.

(c) Check if the same DTC is recorded (See page ).


Result

Proceed to

DTC (ABS control system DTC) is not output

A

DTC (ABS control system DTC) is output

B


B

REPAIR CIRCUITS INDICATED BY OUTPUT DTCS

A
  1. RECONFIRM DTC

(a) Turn the ignition switch off.

(b) Clear the DTCs (See page ).


(c) Start the engine.

(d) Drive the vehicle at a speed of approximately 40 km/h or more for 60 seconds or more.

(e) Check if the same DTC is recorded (See page ).


Result

Proceed to

DTC (43) is not output

A

DTC (43) is output

B


A

CHECK FOR INTERMITTENT PROBLEMS


B

REPLACE BRAKE ACTUATOR ASSEMBLY

Test yourself

A quick Toyota Venza quiz: every answer comes with an explanation and a link to the manual page.