How To Proceed With Troubleshooting

HINT:

*: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT

1. CUSTOMER PROBLEM ANALYSIS

(a) Interview the customer and confirm the trouble. (See page ).

HINT:

Interview the customer to confirm the following:

• History of brake fluid replacement.
• Whether the engine was stopped intentionally when driving.
• Whether the brake and accelerator pedals were depressed simultaneously.

NEXT

1. CHECK DTC AND FREEZE FRAME DATA*

(a) Check and record DTCs and Freeze Frame Data.

(b) Clear the DTCs and Freeze Frame Data (See page for DTC Check/Clear, or See page
for Freeze Frame Data).

(c) Reconfirm the DTCs.

(1) Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data (See page for DTC Check/Clear, and See page
for Freeze Frame Data).

HINT:

• When DTCs indicating CAN communication system malfunctions are output, repair the CAN communication system before repairing each corresponding sensor (See page ).


• If any of the DTCs U0100/65, U0123/62, U0124/95 and U0126/63 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit (See page
  ).

B

GO TO STEP 5

C

GO TO STEP 6

A

1. DIAGNOSTIC TROUBLE CODE CHART

(a) Proceed to Diagnostic Trouble Code Chart (See page ).

NEXT

GO TO STEP 7

1. SYMPTOM SIMULATION

(a) Proceed to How to Proceed with Troubleshooting (See page ).

NEXT

GO TO STEP 6

1. PROBLEM SYMPTOMS TABLE

(a) Proceed to Problem Symptoms Table (See page ).

NEXT

1. CIRCUIT INSPECTION*

NEXT

1. IDENTIFICATION OF PROBLEM

NEXT

1. REPAIR OR REPLACEMENT

NEXT

1. CONFIRMATION TEST*

NEXT

END