Fuel injection system
Accelerator Cable Adjustment
In this manual: Fuel injection system
~1min read
PROCEDURE

Accelerator Cable Adjustment 1 – retaining clip; 2 – adjusting fitting; 3 – bracket; 4 – accelerator cable; 5 – lever; a – clearance between lever and stop
PROCEDURE 1. Press the accelerator pedal fully down and hold it in this position. 2. Remove clip 1 from the slot of adjusting fitting 2. 3. Move adjusting fitting 2 to set clearance "a" within 0.5–1.0 mm. 4. Install clip 1 in the slot on adjusting fitting 2 closest to bracket 3.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?