Pressure regulator
PROCEDURE

Pressure regulator components 1 – bolt; 2 – bracket; 3 – pressure regulator; 4 – nut; 5 – washer; 6 – spring; 7 – nut; 8 – bracket; 9 – spacer sleeve; 10 – bushing; 11 – bolt; 12 – beam; 13 – bolt
Warning: Adjustment of the pressure regulator is recommended to be performed at a service station equipped with special equipment.
Removal PROCEDURE 1. Disconnect the brake lines from pressure regulator 3 (see fig. Pressure Regulator Components). 2. Remove spring 6. 3. Unscrew bolts 1 securing the pressure regulator. 4. Remove the pressure regulator. Installation PROCEDURE 1. Install pressure regulator 3 and tighten bolts 1. 2. Install spring 6. 3. Connect the brake lines. 4. Bleed the brake system. 5. Adjust the pressure regulator at a service station.
Test yourself
A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.