Diesel Engine Fuel System

Fuel Feed Control Cable

~1min read

Adjustment PROCEDURE 1. Press the accelerator pedal fully down and hold it in this position. 2. Remove retaining washer 3 (see fig. Bosch Fuel Pump Control Linkage) from the slot of the adjusting end fitting. 3. Move cable 2 in the bracket so that lever 5 contacts screw 4. 4. Install retaining washer 3 into the slot of the adjusting end fitting closest to the bracket.

Test yourself

A quick Volkswagen Golf quiz: every answer comes with an explanation and a link to the manual page.