Wireless Charger

The wireless phone charging pad is located in the tunnel console.

To be able to charge, the phone must have wireless charging (Qi) capability. Phones not equipped with a wireless charging receiver can often be supplemented with a shell that enables wireless charging.

Using the wireless phone charger

The rubber pad in the tunnel console can be used to charge a phone without having to connect its cord.

Wireless phone charger in the tunnel console.

The charging plate can be switched on and off via the center display's Function view. The default setting of the charging plate is activated. When the charging plate is switched on, a message will appear describing the risks for users with pacemakers or other implanted devices who could be affected by the plate.

Tap the center display to confirm that the charging plate should be switched on.

To use the wireless charging plate:

1. 1
   Make sure that the charging plate is switched on in the center display's Function view.
2. 2
   Remove all objects from the charging pad and place the phone in the center of the pad.

   1. The phone will begin charging and the symbol will appear at the top of the center display.

If the phone does not charge:

• Make sure that the charging plate is switched on in the center display's Function view.
• Make sure there are no other objects on the charging pad.
• Make sure the phone supports wireless charging (Qi).
• If the phone has a case, remove it.
• Lift the phone, then place it back in the center of the charging pad.
• Make sure the ignition is switched on.

If the phone is incorrectly positioned or an object prevents charging on the charge pad, a message is shown on the center display.