Поддержка водителя

Выбор и активация адаптивного круиз -контроля

2шагов
~12мин
2/5сложность
Выполнено 0 из 2

(В зависимости от рынка эта функция может быть стандартной или необязательной.)

Adaptive Cruise Control (ACC1 ) must first be selected and then activated before it can regulate speed and distance.

Volvo XC90. Selecting and activating Adaptive Cruise Control

Чтобы начать функцию:

  • Ремень безопасности водителя должен быть подстегнут, а дверь водителя должна быть закрыта.
  • There must be a vehicle ahead (target vehicle) within a reasonable distance or your vehicle's current speed must be at least 15 км/ч.
  1. Press the Volvo XC90. Selecting and activating Adaptive Cruise Control (2) or Volvo XC90. Selecting and activating Adaptive Cruise Control (3) button on the steering wheel keypad and scroll to the Adaptive Cruise Control symbol Volvo XC90. Selecting and activating Adaptive Cruise Control (4).
    • Серый символ - адаптивный круиз -контроль находится в режиме ожидания.
  2. When Speed Limiter is selected, press Volvo XC90. Selecting and activating Adaptive Cruise Control (1) on the steering wheel keypad to activate.
    • White symbol – Speed Limiter starts and the current speed is stored as the maximum speed.

Реактивация адаптивного круиз -контроля до последней сохраненной скорости

  • When Adaptive Cruise Control is selected, press Volvo XC90. Selecting and activating Adaptive Cruise Control on the steering wheel keypad to activate.
    • The Cruise Control marking in the instrument panel will change from GRAY to WHITE and the vehicle will then return to the most recently set speed.

1 Адаптивный круиз -контроль

Проверьте себя

Короткий тест по Volvo XC90: после ответа — пояснение и ссылка на страницу руководства.