CHECK control button

Fig. 6 Partial view of instrument cluster: CHECK control button

The control buttonlets you use
the following functions:

Activation of the digital clock and odometer

When the ignition is switched off, simply press the check button=> Fig. 6 to illuminate
the digital clock with date display and the odometer for a few seconds.

Starting the check (global check system)

The system checks the status of certain vehicle functions and components. The check takes place when the ignition is switched on and also while driving.

When the ignition is switched on, you can manually start a “check procedure” by pressing the check button, You can display the distance remaining until the next service due, with the engine off or running.

Driver information display

When a priority 1 symbol flashes in the display or the warning lamp comes on to indicate a faulty bulb, you can display the corresponding message by pressing the check button,
For example:

Stop the engine, check the oil level

The information display for the driver disappears after approximately 5 seconds.

Setting the speed warning system

You can store speed warning 1 of the speed warning system => 'Speed warning 1: operation' while driving by pressing the control button.Speed warning
2* of the speed warning system => 'Speed warning 2: operation' can only be stored when the ignition is switched off.