Green indicator lights

Stop & Start

Steady.

When the vehicle is stopped, the Stop & Start system has put the engine into STOP mode.

Flashing briefly.

STOP mode is temporarily unavailable or START mode has been triggered automatically.

For more information, refer to the Driving section.

Vehicle ready to drive (Plug-in hybrid)

Steady, accompanied by an audible signal when it comes on.

The vehicle is ready to drive.

The indicator goes out above approximately 5 km/h and comes back on when the vehicle is stopped.

Switch off the engine to turn off the indicator and leave the vehicle.

Park Assist

Steady.

The function is active.

For more information, refer to the Driving section.

Lane keeping assist

Steady.

The function has been activated.

All conditions are met: the system is working.

For more information, refer to the Driving section.

Hill Assist Descent Control

Steady.

The function has been activated, but the control conditions are not met (gradient, speed too high, gear selected).

Flashing.

The function starts controlling the speed.

The vehicle is braking; the brake lights come on during the descent.

Turn signals

Indicators with buzzer.

The direction indicators are on.

Position lamps

Steady.

The lights are on.

Low beam

Steady.

The lights are on.

Automatic high beam switching

Steady.

The function has been activated via the touchscreen (Driving / Vehicle menu).

The lighting control is set to "AUTO".

For more information, refer to the Lighting and visibility section.

Front fog lights

Steady.

The front fog lights are on.

Automatic wiping

Steady.

Automatic front wiper operation is activated.

Blue indicator lights

High beam

Steady.

The lights are on.

eSave function (Plug-in hybrid)

Steady, together with the reserved electric range.

The eSave function is activated.

White or black indicator lights

Hill Assist Descent Control

Steady.

(grey)

The function is activated but currently paused because the speed is too high.

Reduce the vehicle speed below 30 km/h.