Electric Window Lifters

For power windows to operate, the ignition key must be in the ON (II) position. To lower the window, lightly press the switch down and hold it. Release the switch when the window reaches the desired position. To raise the window, pull the switch up and hold it.

Power windows remain operational for 10 minutes after the ignition is turned off. Opening either of the front doors cancels this function.

The power window can clamp and seriously injure a hand or fingers caught in the window opening.

Before closing a window, make sure passengers' fingers are outside the window opening.

WARNING: When leaving the vehicle with children or adult passengers remaining inside, always remove the ignition key and take it with you.

The switches for all power windows are located on the driver's door armrest. To open the window of any passenger door, press down on the switch for the corresponding window and hold it until the window reaches the desired position. To raise the window, lightly pull the switch up. Release the switch when the window reaches the desired position.

AUTO MODE — The driver's or front passenger's window can be fully lowered automatically. To do this, press the window switch firmly and release it immediately.

The window will lower fully automatically.

To stop the window, briefly pull the switch up.

The driver's or front passenger's window can be fully raised automatically. To do this, press the window switch firmly and release it immediately. The window will automatically rise fully. To stop the window, briefly press the switch down.

To partially open or close the driver's or front passenger's window, lightly press the switch or pull it up and hold it in that position.

You can stop the window at the desired position by releasing the switch.

Press the power window lockout button to prevent passengers from raising or lowering the windows on their own. To cancel this function, press the power window lockout button again so that it pops out.

Locking the passenger door window controls is recommended when transporting children in the vehicle, who could be injured by accidentally operating the power window.

PINCH PROTECTION FUNCTION — If a front door window is rising automatically and an obstacle is encountered in its path, the window automatically stops rising and lowers back to its original position. To close the window after the power window has stopped, remove the obstacle from the window opening and pull the window switch again.

The pinch protection function does not operate when the window is almost fully closed. Even with this function, always make sure there are no body parts of passengers or foreign objects in the window opening before closing the window.

NOTE: The driver's window pinch protection function is disabled while the window switch is held in the raised position.