Seat Heaters

Both front seats of your vehicle are equipped with electric heaters. The heaters operate only when the ignition is on (ignition key in the ON (II) position).

Press the front part of the switch (HI) to activate high-intensity seat heating. Once the seat reaches the desired temperature, press the rear part of the switch (LO) to activate low-intensity seat heating. This will keep the seat warm.

In high heat mode (HI), the system automatically turns off once the seat has heated up, and turns on again if the seat cools down.

In low-intensity (LO) heating mode, the heater operates continuously.

The heating modes do not change automatically when the seat temperature changes.

When using the seat heaters, observe the following precautions:

Use the HI mode only for initial warming of the seats, as using this mode drains the battery.

Do not turn on the seat heaters, even in low-intensity (LO) mode, with the engine off or when the engine is idling for extended periods. This may drain the battery and make it difficult to start the engine.