Fuel Filter Replacement
PROCEDURE

1. Remove the rear seat cushion and remove the fuel pump inspection cover. To relieve fuel system pressure, disconnect the fuel pump connector, start the engine and let it run until it stops from fuel consumption in the fuel lines and fuel rail.
2. Disconnect the negative battery cable and reconnect the fuel pump connector.
Before disconnecting the fuel lines, relieve the fuel system pressure, otherwise pressurized fuel will spray out of the fuel system.
3. Remove the screws securing the fuel filter tube clamps.
Cover the fuel filter with a shop towel to prevent fuel spray caused by residual pressure in the fuel line.
4. Remove the fuel filter mounting bolts and remove the filter from the bracket.

5. After replacing the fuel filter, check the fuel system for leaks.
Test yourself
A quick Hyundai Accent quiz: every answer comes with an explanation and a link to the manual page.