Starter Lockout System (Ignition Switch Lockout System) Inspection

~1min read
ПРОВЕРКА ПЕДАЛИ СЦЕПЛЕНИЯ

CLUTCH PEDAL INSPECTION

Check that the clutch pedal height from the floor, clutch pedal free play, and play in the clutch pedal pin joint are within specification. (Refer to CH "Clutch".)

STARTER RELAY INSPECTION

Снимите реле стартера и проверьте состояние цепи между выводами в соответствии

Remove the starter relay and check the continuity between terminals as specified in the table. If the continuity differs from the specification, replace the relay.

CLUTCH PEDAL SWITCH INSPECTION

Проверьте состояние цепи между выводами в соответствии с таблицей.

Check the continuity between terminals as specified in the table.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.