Hyundai Elantra CN7 Quiz

Starter Assembly

In this manual: Starter Assembly
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read

1. Install the overrunning clutch onto the front end of the starter armature shaft.

2. Установите сначала ограничительное кольцо, затем стопорное кольцо на передний

2. Install the stopper ring first, then the snap ring, onto the front end of the starter armature shaft. Fit the overrunning clutch stopper ring onto the snap ring until it stops.

3. При установке рычага в передний кронштейн стартера обращайте внимание на ориентацию

3. When installing the lever into the starter front bracket, pay attention to the lever orientation. If the lever is installed incorrectly (i.e., in the opposite direction), the pinion gear will remain in the extended position and will not operate correctly.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.