Hyundai Elantra CN7 Quiz

Technical Data

In this manual: Technical Data
Repair and Maintenance Manual for Hyundai Elantra — 0General Information — 0Engine - Mechanical (DOHC 1.8L/2.0L) — 0Engine - Mechanical (DOHC 1.6L) — 0Engine Electrical Equipment — 0Emission Control System — 0Fuel system — 0Clutch — 0Transmission — 0Wheel Drive Shaft and Axle — 0Suspension — 0Steering — 0
~1min read

IGNITION COIL

Type Ignition coil primary resistance Ignition coil secondary resistance With two ignition coils (encapsulated in composite material) 0.5 ± 0.05 Ω 12.1 ± 1.8 kΩ

SPARK PLUGS

Type NGK Champion Spark plug electrode gap, mm For unleaded gasoline BKR5ES-11 RC10YC4 1.0 – 1.1

STARTER MOTOR

Type Rated output Duration of operation Characteristics (no load): Terminal voltage Current Maximum rotation speed Number of pinion teeth Pinion clearance, mm 1.6L - direct drive, 1.8L, 2.0L - reduction planetary gear 0.9 kW, 1.2 kW at 12 V 30 seconds 11.5 V 90 A or less 6600 rpm or more 8 0.5 – 2.0

GENERATOR

Type Rated output Voltage regulator type Voltage regulation range Temperature compensation of regulated voltage With battery voltage regulation 13.5 V 75 A, 90 A Built-in, electronic 14.4 ± 0.3 V -10 ± 3 mV/°C

BATTERY

Type Capacity (5-hour rate) Capacity (20-hour rate) Peak current during cranking (at -17.8 °C) Reserve capacity Electrolyte density (at 25 °C) MF 45Ah 36 A·h or more 45 A·h or more 380 A or more 80 minutes 1.280 ± 0.01 g/cm3 MF 60Ah 48 A·h or more 60 A·h or more 550 A or more 92 minutes 1.280 ± 0.01 g/cm3

Peak current during cranking – the current supplied by the battery for 30 seconds at a voltage of 7.2 V at the specified temperature.

Reserve capacity – the time during which the battery can supply a current of 25 A at a voltage of 10.5 V and a temperature of 26.7 °C.

Test yourself

A quick Hyundai Elantra CN7 quiz: every answer comes with an explanation and a link to the manual page.