Warning Light and Message

When the High Beam Assist (HBA) system malfunctions, a warning message will appear for several seconds. After the message disappears, the master warning light () will illuminate.

We recommend that you take your vehicle to an authorized HYUNDAI dealer and have the system checked.

CAUTION

The system may not operate normally if any of the following conditions occur:

1) When the light from an approaching vehicle or the vehicle ahead is dim. Examples include:

• When the headlights of an oncoming vehicle or the tail lights of a vehicle ahead are covered with dust, snow, or water
• When the headlights of an oncoming vehicle are off but the fog lights are on

2) When the high beam is on and the camera is significantly affected by external conditions. Examples include:

• When the vehicle's headlights are damaged or not properly repaired
• When the vehicle's headlights are not properly aimed
• When driving on a narrow, winding road or an uneven road
• When driving on a steep uphill or downhill road
• When only a portion of the vehicle ahead is visible at an intersection or on a curved road
• When there is a traffic light, reflective sign, flashing sign, or mirror
• When road conditions are poor, such as when the road is wet or covered with snow
• When a vehicle suddenly appears from around a curve
• When the vehicle is tilted due to a flat tire or towing
• When the Lane Keeping Assist (LKA) warning light is illuminated
• When the light from an oncoming or preceding vehicle is not detected due to exhaust gas, smoke, fog, snow, etc.
• When the windshield is blocked by foreign matter such as

3) When forward visibility is poor. Such examples may include:

• When the headlights of an oncoming vehicle or a vehicle ahead are not detected due to poor outside visibility (smog, smoke, dust, fog, heavy rain, snow, etc.)
• When visibility through the windshield is poor

Information

When replacing or reinstalling the windshield or the LDW/LKA camera (if equipped), we recommend that you take your vehicle to an authorized HYUNDAI repairer and have the system inspected.

WARNING

• Do not attempt to disassemble the front view camera without the help of an authorized HYUNDAI service technician. If the camera is removed for any reason, the system may need to be recalibrated. We recommend that the system be inspected by an authorized HYUNDAI repairer.
• If your vehicle's windshield is replaced, the front view camera will likely need to be recalibrated. If this happens, have your vehicle inspected and the system recalibrated by an authorized HYUNDAI repairer.
• Be careful not to allow water to enter the High Beam Assist (HBA) system, and do not remove or damage the related parts of the High Beam Assist (HBA) system.
• Do not place objects such as mirrors, white paper, etc. on the emergency pad that reflects light. The system may malfunction if sunlight is reflected.
• The High Beam Assist (HBA) system may occasionally malfunction. The system is provided for your convenience only. It is the driver's responsibility to practice safe driving and always check road conditions for your safety.
• If the system does not operate normally, manually change the headlight position between high beam and low beam.