Detection Sensor

The rear radars are located inside the rear bumper to detect the side and rear areas. Always keep the rear bumper clean for normal system operation.

NOTICE

• The system may not operate correctly when the bumper has been damaged, or if the rear bumper has been replaced or repaired.
• The system may be disabled by electromagnetic interference.
• Always keep the sensors clean.
• NEVER disassemble the sensor component or apply any impact to the sensor component.
• Be careful not to apply unnecessary force to the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the system may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by an authorized HYUNDAI dealer.
• Do not attach foreign objects, such as a bumper sticker or bumper guard, near the radar sensor, or paint the sensor area. This may adversely affect sensor performance.

Warning Message

This warning message may appear when:

- One or both of the sensors on the rear bumper are blocked by mud, snow, or a foreign object.
- Driving in rural areas where the sensor does not detect other vehicles for a long period of time.
- In bad weather, such as heavy snow or rain.

If any of these conditions occur, the BCW/BCA switch indicator will illuminate and the system will turn off automatically.

When the BCW cancel warning message is displayed in the cluster, check that the rear bumper is free of mud and snow in the areas where the sensors are located. Remove mud, snow, or foreign objects that may interfere with the radar sensors.

After the mud or debris has been removed, the system should operate normally after approximately 10 minutes of driving the vehicle.

If the system still does not operate normally, have your vehicle checked by an authorized HYUNDAI dealer.

Information

Turn off the BCW and RCCW systems when installing a trailer or carrier.

- Press the BCW/BCA switch (the indicator light on the switch will turn off)
- Deactivate the RCCW system by deselecting 'User Settings → Driver Assistance → Parking Safety → Rear Cross-Traffic Collision Warning'

Blind-Spot Collision Warning (BCW) System Check

If there is a problem with the BCW system, a warning message will appear and the indicator light on the switch will turn off. The system will turn off automatically. RCCW and RCCA will also not operate if the BCW system is turned off due to a malfunction. Have your vehicle inspected by an authorized HYUNDAI dealer.