Headlight, Position Light, Turn Signal Light, Daytime Running Light Replacement (DRL)

Type A (Bulb)

(1) Headlight (Low/High)
(2) Turn Signal Light
(3) Daytime Running Light/Position Light
(4) Side Marker

Headlight/Turn Signal Light

1. Apply the parking brake and disconnect the negative battery cable.

2. Remove the wheel guard clips (front bumper: 4 pcs.).

3. Slide the protective cover aside and remove the bulb socket by turning it counterclockwise.

4. Remove the bulb from the socket by pushing it in and turning it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.

5. Install a new bulb by inserting it into the socket and turning it until it locks into place.

6. Insert the socket into the assembly and turn the socket clockwise.

7. Install the protective cover in reverse order.

Daytime Running Light, Position Light, Side Marker (LED)

If the LED light does not work, the system must be inspected by an authorized HYUNDAI dealer. LED lights cannot be replaced individually because they are an integrated unit. The LED lights must be replaced as a unit. A qualified technician must inspect or repair the LED light, as improper work may damage related vehicle parts.

B-Type (LED)

(1) Headlight (Low Beam)
(2) Headlight (High Beam)
(3) Daytime Running Light/Position Light
(4) Turn Signal Light
(5) Side Marker

If the LED lamp does not work, the system must be inspected by an authorized HYUNDAI dealer. The LED lamp cannot be replaced separately because it is an integrated unit. The LED lamp must be replaced together with the unit.

A qualified technician should inspect or repair the LED light, as improper handling may damage related vehicle parts.