Under-Bed Storage
The under-bed storage compartment is water-resistant and can be locked and unlocked using the remote key or smart key.
Opening the Under-Bed Storage

The under-bed storage compartment can be unlocked and opened by the following methods:
Vehicles equipped with a remote key:
- Unlock all doors using the main unlock button on the vehicle or by pressing the unlock button on the remote key.
Vehicles equipped with a smart key:
- Unlock all doors using the main unlock button on the vehicle or by pressing the unlock button on the smart key.
- With the smart key in your possession, open the tailgate and then simply press the storage release button on the floor.
Closing the Under-Bed Storage
.jpg)
To close the under-bed storage cover, pull the cover down.
Note that if the under-bed storage cover is not fully closed, the bed LED lights will remain on and a warning message may appear on the cluster LCD.
Information
It is normal for the under-floor storage compartment to have a smell when the vehicle is new. This smell is normal, safe, and will decrease over time, like any new vehicle smell.
PLEDGE
- The under-bed storage must be dried before closing the cover to prevent mold growth.
- Make sure the water drain channel and sealing surface are free of debris.
- Do not store valuables in the under-bed storage.
- Do not apply water directly to the under-bed storage latch. This may cause damage to the latch.
WARNING
- Do not enter the under-bed storage.
- If someone becomes trapped inside the storage compartment, pull the emergency release lever (1).
How to Open the Under-Bed Storage Cover Manually
If a power failure prevents the under-bed storage cover from opening, the latch can be mechanically released using the following steps:
.jpg)
1. Remove the tailgate assembly from its hinges.
.jpg)
2. Insert a hooked or ribbed tool between the cover and the bottom, where the release cable is located.
3. Apply even downward force to release the latch.
Test yourself
A quick Hyundai Tucson quiz: every answer comes with an explanation and a link to the manual page.