System Operation

Ventilation

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

Heating

1. Set the mode toposition.

2. Set the air intake control to the outside (fresh) air position.

3. Set the temperature control to the desired position.

4. Set the fan speed control to the desired speed.

5. If desired, turn on the air conditioning with the temperature control set to heat to dehumidify the air before it enters the cabin.

If the windshield fogs up, set the mode selector toorposition.

• To protect against dust or unpleasant odors entering the vehicle through the ventilation system, temporarily set the air intake control to the recirculation position. Be sure to return the control to the fresh air position when the irritation has passed to keep the vehicle air fresh. This can help keep the driver alert and comfortable.
• To prevent interior windshield fogging, set the air intake control to the fresh air position, turn the fan speed to the desired position, turn the air conditioning on, and adjust the temperature control to the desired temperature.

Air Conditioning

1. Start the engine. Press the air conditioning button.

2. Set the mode toposition.

3. Set the air intake control to the fresh air or recirculation position.

4. Adjust the fan speed and temperature control as desired.

NOTICE

• When using the air conditioning system, carefully monitor the temperature gauge while driving uphill or in heavy traffic when outside temperatures are high. Continue to use the fan but turn off the air conditioning system if the temperature gauge indicates the engine is overheating.
• Always use air conditioning with the windows closed. In humid weather, if the windows are open and the air conditioning is running, water droplets may form inside the vehicle and potentially damage electrical equipment.

• If the vehicle has been parked in direct sunlight in hot weather, open the windows briefly to allow hot air to escape from the vehicle.
• Once sufficient cooling is achieved, switch back from the recirculation position to the fresh outside air position.
• To reduce humidity inside the windows on rainy or humid days, reduce humidity inside the vehicle using the air conditioning system with the windows and sunroof closed.
• Run the air conditioning system for several minutes every month to ensure maximum system performance.
• If you operate the air conditioning excessively, the difference between the outside air temperature and the windshield temperature may cause the outer surface of the windshield to fog up, resulting in loss of visibility. In this case, set the mode selector knob to the defrost position.position and set the fan speed control knob to the lowest speed setting.