STARTING AND OPERATING
Engine Restart from Auto Stop
In this manual: STARTING AND OPERATING
~1min read
With the transmission in gear, the engine will restart when the brake pedal is released or the accelerator pedal is depressed. The transmission will automatically shift into gear after the engine restarts.
Conditions that may cause the engine to restart automatically from Auto Stop:
- The gear selector is moved out of DRIVE.
- To maintain a comfortable cabin temperature.
- The actual cabin temperature differs significantly from the temperature set in Auto HVAC.
- The HVAC is set to full defrost mode.
- The HVAC temperature or manual fan speed is adjusted higher.
- Battery voltage drops too low.
- The Stop/Start OFF switch is pressed.
- A Stop/Start system fault occurs.
- The STOP/START AUTO STOP ACTIVE time exceeds 5 minutes.
- The transfer case is in 4WD Low or N (Neutral).
- The steering wheel is turned beyond the threshold (ESS models only).
Test yourself
A quick Jeep Wrangler quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?